Are my airbags actually installed?

G

GRWeldon

5th Gear Poster
Joined
Oct 5, 2023
Messages
479
Location
Alabama
Country flag
I'm wondering if there is an easy way to tell if my passenger airbag is installed? The bird I'm working on is giving the 5 beeps and flashing code 51. I don't have history on this car so I don't know for sure if the bags are even in it.

The cover over the passenger bag is a slightly different shade of tan and I'm suspicious.

While I'm talking about it, how is the passenger bag removed? I'm guessing you don't just rip off the cover. Maybe you do. I don't know...
 
As always,
  • Follow at your own risk
  • Disconnect battery
  • Wait
  • Wait some more
  • Others may know how long exactly
  • Use protective gloves and eyewear
  • Proceed to removal

Removal:
  • Lower glovebox to floor
  • Remove air ducts (two pieces); three bolts plus one screw holding the two pieces to each other
  • Remove airbag bolts (four)
  • Gradually push airbag backwards until connector is accessible
  • Disconnect connector
  • Remove airbag
 
If you have the cover, you have an airbag. The cover is not removable separately, at least not without a lot of work, and when the airbag blows, it tears the cover in half, and also damages the dashboard around the airbag. So I’m confident you have an airbag. However the airbag could have been replaced and not plugged in, or it could be a wiring problem, or a problem with the airbag computer. Often when airbags do deploy, the computer gets fried in the process of triggering the airbags.
 
With that error, op does not have a working system. The blue box needs replaced, and the system tested with airbag simulators.
Just replacing the box could deploy good bags.
 
You must log in or register to reply here.

Similar threads

Back
Top