Oil Filter Reocation

[Bill H]

My current relocation kit has been a leaky POS.
The block plate I think is the leaky problem. The AN fittings and the filter plate seem ok.

Has anyone found a high quality kit? Post a link.

 

[Grog6]

I'm using a copy of an mmr plate,an10 oil lines to a oil filter holder from summit. The plate on the engine is 3/4" aluminum; I don't expect any leaks.

Remote Oil Filter & Cooler Adapter, 4.6 and 5.4 Ford Modular V8

Allows you to relocate your oil filter to a more practical location as well as adding an optional oil cooler Two 1/4" NPT ports and one 1/8" NPT for factory sensor, aftermarket sensors or oil line feeds Engine oil ports are -10AN O-ring boss ports while the water port is a -16AN O-ring boss port...

www.improvedracing.com

I'm pairing that with a Derale filter holder. AN10 braided stainless oil lines.

This is what I actually bought.

FOR 91-12 FORD MODULAR V8 4.6/5.4 ANODIZED REMOTE OIL FILTER ADAPTER COOLER KIT | eBay

Modular V8 Oil Filter Relocation Adapter 91-12 Ford Modular V8 4.6L 5.4L. These remote oil filter adapters are designed to plumb remote oil filters and oil coolers. The fitting direction is adjustable for the best clearance.

www.ebay.com

 

[Bill H]

Thank you!

I think my leak is where the OE adaptor accepts the spin on relo housing. I see this replaces that adaptor altogether.

If I go this route looks like I need to find a 90 degree coolant bend to duplicate the OE adaptor.