Found Rear ABS sensor

[Matt_aka_Dale]

I'm looking for just one in really good shape, which is probably asking way too much. I recently got two used ones and ultimately wasted a little money and time on that. I did manage to find one NOS sensor which is perfect for $100. I feel like I will inevitably end up trying to cut up and repair the used ones I have, but it's worth checking out to see if anyone has one.

 

[KevinVarnes]

For your '89 I presume?

 

[Generalee0527]

Lrft or Right? Ebay has the following:

 

[KevinVarnes]

Other option is to look at a similar vintage Crown Vic/Town Car and see what is available. Wire lengths may be different and clips may be in different locations, but there is a pretty good chance they will function the same. For some reason older Crown Vic wheel speed sensors are much more readily available from the aftermarket. Check them out for a '92 when they went to the aero body style on Crown Vic or '91 for the Town Car. I don't think ABS was a thing on the 88-91 CV/GM cars. No guarantees, but at least worth a look.

 

[Matt_aka_Dale]

For your '89 I presume?

Yes. Sorry I meant to add that

Lrft or Right? Ebay has the following:View attachment 15969

I've been eyeing this too. Honestly the sensors look the same so I didn't think it mattered what side they were on...

Other option is to look at a similar vintage Crown Vic/Town Car and see what is available. Wire lengths may be different and clips may be in different locations, but there is a pretty good chance they will function the same. For some reason older Crown Vic wheel speed sensors are much more readily available from the aftermarket. Check them out for a '92 when they went to the aero body style on Crown Vic or '91 for the Town Car. I don't think ABS was a thing on the 88-91 CV/GM cars. No guarantees, but at least worth a look.

Hmmm. Okay I'll keep an eye out

 

[KevinVarnes]

You can get a cheap aftermarket Crown Vic wheel speed sensor to test/try from RockAuto for $15.

 

[XR7-4.6]

The crown Vic option won’t work since the rear ABS sensor mounts to the differential case not the spindles with much different mounting pads

 

[Matt_aka_Dale]

AdamG is my savior. Got one off his parts bird