Fred Smailes
Newbie
- Joined
- Aug 1, 2024
- Messages
- 11
- Location
- BC Canada
- Vehicle Details
- '89 XR7 5speed In a '64 Mercury Comet
Reading through the forums I seen GRWeldons post on shielding wire.
So as not to interfere with his post thought I'd ask this question in a new post.
I'm interested in remote mounting the ICM and wondering if there needs to be any wire shielding. The thought is to add about 3ft of length to the harness by cutting and splicing std wire in.
I've mounted the ICM on a heat sink at the moment and is working so far.
So as not to interfere with his post thought I'd ask this question in a new post.
I'm interested in remote mounting the ICM and wondering if there needs to be any wire shielding. The thought is to add about 3ft of length to the harness by cutting and splicing std wire in.
I've mounted the ICM on a heat sink at the moment and is working so far.
