Thinking about getting this 97

What’s not to understand? Follow the lines. Power on top, ground on bottom.

As for the fan fuse, it is in the underhood fuse box. 50A, as shown in the diagram.
 
CDsDontBurn said:
As helpful as this is to many people, and while I also am thankful for you having provided this, I do not understand wiring diagrams 😓.
Click to expand...

The only thing that may be of interest for you are the letters or letter combinations on the right side of each wire. Those are color codes, e.g., DB = dark blue. Most of them, you can guess; others you can google.

I find these diagrams extremely enlightening. I learn by understanding how things are designed/connected. So this information makes me way more comfortable in tackling projects.
 
MadMikeyL said:
What’s not to understand? Follow the lines. Power on top, ground on bottom.

As for the fan fuse, it is in the underhood fuse box. 50A, as shown in the diagram.
Click to expand...

I can follow lines but I don't know what all the other lines in between are.
 
CDsDontBurn said:
I can follow lines but I don't know what all the other lines in between are.
Click to expand...

The lines in between are the internals of the CCRM, so not much use to know anyway. But the takeaway you can get from it is the dark blue wire is low speed power, brown/orange is high speed, black is ground and on the other side of the CCRM is the black/orange power wire coming from the fuse
 
So for ahits and giggles, I did the same test on Pearl and the fan came on when connected straight to the battery on both black/red and blue. I tested Gold Bird again and still, the black/red wire is dead.

I'll take that as a bad fan confirmation as stated by @Kidd-7 and will be buying a replacement fan. $133+ tax for a Dorman unit from a VatoZone 30min away from home.
 
CDsDontBurn said:
So for ahits and giggles, I did the same test on Pearl and the fan came on when connected straight to the battery on both black/red and blue. I tested Gold Bird again and still, the black/red wire is dead.
Click to expand...

Still check the fuse, and monitor temperature after the fan replacement. I mean this still doesn't fully explain the overheating, does it?
 
1997ThunderbirdLXV6 said:
Is that just the motor or the whole fan assembly? The motor is just $28 on Rockauto. Why not just swap it over from Pearl, then replace that one later?
Click to expand...

Pretty sure it was just the motor and I'm 99.99% confident that it's been replaced once before by P.O.

Also, RA has the entire assembly for $70 but after shipping it would probably have been what I just paid for it at AZ.

Replacement fan has lifetime warranty, so I'll take that for next time, and I have two cars now so it's double important, lol.

1997ThunderbirdLXV6 said:
Still check the fuse, and monitor temperature after the fan replacement. I mean this still doesn't fully explain the overheating, does it?
Click to expand...

I will still check that fuse.
 
It's been pretty warm there, right? If it's only working on high or low speed, then part off the time it's not running at all. In hot temps that could very well be all there is for an issue. Am I remembering correctly you put a new intake on this car? If not check the thermostat for cycling at the proper temp. ( Need to find your IR gun for that)
 
You must log in or register to reply here.
Back
Top