Door side trim

[GRWeldon]

Is there a source for the stick-on bar-type door trim as shown in the picture below? I've had it fall off from my 94SC and the 95LX has to come off to repair surface rust underneath.

 

[1997ThunderbirdLXV6]

Do you have junkyards in your area?

Removal should be easy, assuming it's just double-sided tape; just pull some dental floss under it.

 

[andy625uk]

It is just held on with tape. I had to replace one of mine after a side impact, and the only option i found was to get a second hand item. I found one, repainted it and stuck it back on with tape. the hardest part is getting the position right. Take measurements before you take it off.

 

[GRWeldon]

It is just held on with tape. I had to replace one of mine after a side impact, and the only option i found was to get a second hand item. I found one, repainted it and stuck it back on with tape. the hardest part is getting the position right. Take measurements before you take it off.

OK. Thanks. I suppose I can reuse the ones I have then after removing and cleaning and painting.

Just figured these would be easy to get if you had the correct source.

 

[andy625uk]

You'll be able to reuse it if you get it off in one piece. Be careful as they're quite easy to break. My repainted second hand trim turned out really well and you'd never know it had been disturbed.