Rescued 94 T-Bird project

Unfortunately the only solution to a cracked violin case is to source a pull-off replacement from a 94/95 donor - they were unique to the MN12 and aside from the old Civic tube mod (literally the intake tube from an early-mid 90s Civic replaces the violin case), there isn't any sort of aftermarket replacement.
 
Unfortunately the only solution to a cracked violin case is to source a pull-off replacement from a 94/95 donor - they were unique to the MN12 and aside from the old Civic tube mod (literally the intake tube from an early-mid 90s Civic replaces the violin case), there isn't any sort of aftermarket replacem
I'll look into the civic mod and see what I can find thanks for the input. I'll get something rigged up when I get back from out of town in a couple of weeks.

Forgot to post a picture of the parts put in today. Minus the carpet, was way too hot down in GA to try and roll that out.
1000001332.jpg1000001336.jpg
 
Sorry should have been a little more detailed. The window motor mod.
I found a steel bushing mod on TSTSNBN. After reading it they listed the bushing dimensions and I found a set of aluminum ones about the same size.
Figured it's lighter and a softer metal than steel, but harder than plastic.
If/when they fail I'll get pictures of the carnage but as of right now it works flawless. I had to grind them down a little. Didn't put a mic. on it just trial and error till they fit. Sorry they are about 13 bucks for the pack so around 7 a window.
Below is the link to Amazon.
It’s so great to see you use the TSTSNBN acronym and see the humor behind it. 🤣
 

Similar threads

Back
Top