Where in the hell are the washers?

I'd snag a set from a jy. You might get lucky and find good bushings. rethreading a stripped thread doesn't work. I' d wonder about that shop, if they did that.
 
I'd snag a set from a jy. You might get lucky and find good bushings. rethreading a stripped thread doesn't work. I' d wonder about that shop, if they did that.

Agreed, the right solution is a good used strut rod. I strongly suspect this might have been an issue going back to the beginning of these issues, since the originals were removed. They probably mangled the threads getting the old sleeves off
 
I'd snag a set from a jy. You might get lucky and find good bushings. rethreading a stripped thread doesn't work. I' d wonder about that shop, if they did that.
I may of used the wrong terminology. Idk. He straightened threads that were crossed and mangled. it still looks awful, but he was able to get them tight
 
If the strut rods threads were stripped that really goes a long way towards explaining your persistent issues. I’m less confident the hole in the K member is bad, it’s reinforced and you’d be able to tell if it was that severely damaged.

Shocks binding in turns is impossible, because they’re not struts, they only go up and down so what’s there to bind? The shock to LCA bolts can bind if tightened at droop but that’s about it and extremely easy to fix for a shop


edit im now realizing it will be impossible for any of you to hear the pop with the muffler delete, but i swear on my life its there.. smh. If anyone has an equalizer for their headphones just turn down bass for a second and then you should hear it. its right as i center the wheel and get onto level ground from a slope

I understand, but, the binding may be less in the steering itself, and more just the weight shifting on the said slopes/ turns. I have just done a terrible job at being able to explain it. I do see that as a possibility the lca- strut bolt, however, all of this had been discussed, and he seemed pretty confident about doing the work. The feeling didnt change what so ever with the new arms, unless he just did the exact same thing the last shop did without telling me


Just to clear things up. It is specifically when coming into something like my driveway if i go over a slope/ hole or tight turns where the weight shifts or the car is moving down a slope.

I also removed my inlinks again just out of curiosity. the binding stayed, and the mech still thinks its just the strut rods binding at certain ranges.


Here is a video of said pop- i am correcting my steering but the pop happens at the cars weight settles after a sloped turn.. i can do circles all day in a flat lot with no issues

If it still cannot be a shock, and he torqued my stuff properly i really dont know what else it would be. If its safe for me to put the car on ramps and loosen those bolts and let it settle. i would attempt that to verify.


there are a lot of things to talk about in this photo, im overwhelmed but i assure the gas gauge, and evap code are the least of my concerns, let alone the door ajar light that is constantly on. I was about to head straight to the gas station
 
Last edited:
well shoot, i retorqued the lower lca- shock bolt after bouncing the bumper a few times and letting it settle, the popping, atleast for now is gone?
I have had multiple instances of doing something and then having a placebo effect of " oh i drove around for 3 minutes and it didnt pop fixo doneso" ;o so ill update after a day or two

i have done quite a few things thinking ive solved the puzzle. just for it to rear its head right back around when it feels like it. so ima give it a day or 2 and see if it stays gone, and im taking the car back for a final alignment anyways and having stuff re checked. He wants to make sure the oem style bushings i spent a fortune on are seating properly after driving considering they were forced in there so badly by the last shop.

also, im 120lbs on a good day, and 120ft lbs was not fun laying on my back... that is the highest i could get either to go and ive seen anywhere from 125-150 reccomended so i got it tight as i could
 

Similar threads

Back
Top