The Unofficial "Ask a Stupid Question" Thread

That's exactly how they come out. I've exploded them by barely touching a curb, turning a 180. They are deformed, and kinda shredded by doing that. Moog was the oem.
 
Preference between these oil plugs?

A - single-piece:
download.webp

B - two-piece/replaceable O-ring:
Screenshot_20251118_113602_Samsung Internet.jpg


My car came with A. Never had an issue, and always just reused the old one.

Then, about 2-3 oil changes ago, I decided to get a new plug. No idea why; must have read it somewhere. Went with B. I think there may be some leaking, though that may come from elsewhere. Thinking about switching back to the old plug.
 
1997ThunderbirdLXV6 said:
Preference between these oil plugs?

A - single-piece:
View attachment 15457

B - two-piece/replaceable O-ring:
View attachment 15458


My car came with A. Never had an issue, and always just reused the old one.

Then, about 2-3 oil changes ago, I decided to get a new plug. No idea why; must have read it somewhere. Went with B. I think there may be some leaking, though that may come from elsewhere. Thinking about switching back to the old plug.
Click to expand...
my parents dodge van has A and yeah ive never had an issue, I got a new ford plug when I did the first oil change on my bird, cant remember which type it was but If you think its leaking I would go back to A and make sure its torqued right (I know you would, your quite precise) and clean the pan a ton to make sure its not seepage from somewhere else.
 
1997ThunderbirdLXV6 said:
Preference between these oil plugs?

A - single-piece:
View attachment 15457

B - two-piece/replaceable O-ring:
View attachment 15458


My car came with A. Never had an issue, and always just reused the old one.

Then, about 2-3 oil changes ago, I decided to get a new plug. No idea why; must have read it somewhere. Went with B. I think there may be some leaking, though that may come from elsewhere. Thinking about switching back to the old plug.
Click to expand...
I've used the B type plug with my cars, just replacing the seal on every oil change, never had any leaks from the plug.
 
1997ThunderbirdLXV6 said:
Preference between these oil plugs?

A - single-piece:
View attachment 15457

B - two-piece/replaceable O-ring:
View attachment 15458


My car came with A. Never had an issue, and always just reused the old one.

Then, about 2-3 oil changes ago, I decided to get a new plug. No idea why; must have read it somewhere. Went with B. I think there may be some leaking, though that may come from elsewhere. Thinking about switching back to the old plug.
Click to expand...

On my 4.6 I usually grab the Dorman M14 assorted gaskets every third or forth change, the top middle is as good as the OEM one, and is reusable within reason, and the copper one works second best in a pinch. The rest suck.

IMG_7893.jpeg
 
What is this connector to? Driver side of the engine block. I want to say it's for the block heater connector for cold weather climates...?

1000002227.jpg
 
It’s the low coolant connector for the V6 tank. V8s use a different one and the harness is wired for both
 
I agree, it looks like its made of the same material as semi tractor airbags, so I don't think they would ever fail by popping, however, I could absolutely see it dropping the car by slipping off to the side as the force direction would shift to not be perfectly vertical, unlike a floor jack that pulls itself under to keep the force vector perfectly vertically linear.
 
Ok pretty sure i know what the common response is going to be, but, parking my car I discovered that the door trim is coming off on one side, last year I tried regluing it down with no success, I had the thought "what if I just removed it, how dumb would it look?" So I got Sora to generate an image of my car without the trim, its not perfect but I think it looks ok, but I want the peoples voice, I should also mention that I don't do things on a whim and this is purely an idea, nothing more right now1763937270601.png
 
XR7-4.6 said:
If that crease in the metal were actually under them I’d say go for it, that’s better looking than the unbroken slab of sheetmetal that’s actually underneath. I’ve never liked how these cars looked without them, so nay for me
Click to expand...
are you referring to the line that sora messed up and put there, or the lower line that is actually there? I assume you are referring to the upper fake one that ai put
 
Jae 'Bird said:
the bumper moldings are not removeable separately from the bumper right?
Click to expand...

No they’re part of one big mold and painted. 91-92s with that bumper actually body colored them(partially for 91s)

Jae 'Bird said:
are you referring to the line that sora messed up and put there, or the lower line that is actually there? I assume you are referring to the upper fake one that ai put
Click to expand...

The fake one. AI actually improved the design 😆
 
You must log in or register to reply here.

Similar threads

Back
Top